2020 Honda CR-V
Mileage
47,022
Service Date
7/21/2025
Services Performed
- State Insp. Passenger Car
- Emissions Inspection
- v VALVE CLEARANCE – ADJUST – [Adjust only if noisy.] v BRAKE HOSES & LINES – INSPECT – [Check the master cylinder and ABS/VSA modulator-control unit for damage and leakage.] v DRIVESHAFT/PROPELLER SHAFT DUST BOOTS – INSPECT – [Check boots for cracks and boot bands for tightness.] v EXHAUST SYSTEM – INSPECT – [Check catalytic converter heat shields, exhaust pipes, and muffler for damage, leaks, and tightness. NOTE: According to state and federal regulations, failure to do this maintenance item will not void the customer's emissions warranties. However, Honda recommends that all maintenance services be done at the recommended interval, to ensure long-term reliability.] v FLUID & LUBRICANT LEVELS – INSPECT v FRONT BRAKE SYSTEM – INSPECT – [Check pads and discs for wear (thickness), damage, and cracks. Check calipers for damage, leaks, and tightness of mounting bolts.] v FUEL LINES & CONNECTIONS – INSPECT – [Check for loose connections, cracks, and deterioration; retighten loose connections and replace damaged parts. NOTE: According to state and federal regulations, failure to do this maintenance item will not void the customer's emissions warranties. However, Honda recommends that all maintenance services be done at the recommended interval, to ensure long-term reliability.] v PARKING BRAKE – INSPECT v REAR BRAKE SYSTEM – INSPECT – [Check pads and discs for wear (thickness), damage, and cracks. Check calipers for damage, leaks, and tightness of mounting bolts.] v STEERING GEAR/RACK – INSPECT – [Check steering linkage. Check fluid lines for damage or leaks.] v STEERING RACK BOOTS – INSPECT – [Check boots for damage and leaking grease. Check fluid lines for damage or leaks.] v SUSPENSION COMPONENTS – INSPECT – [Check bolts for tightness. Check condition of ball joint boots for deterioration and damage] v TIE ROD ENDS – INSPECT v ENGINE OIL – REPLACE v ENGINE OIL FILTER – REPLACE v MAINTENANCE MINDER LIGHT – RESET – [Reset the Maintenance Minder Light after every service is performed. If the Light is reset without performing a service, the system will not show the proper maintenance intervals. This can lead to serious mechanical problems because you will no longer have an accurate record of when maintenance is needed.]
- Rotate tires. Set tire PSI. Hand torque lug nuts.
- Change oil and oil filter. Set tire PSI & top off fluid levels. Check lights.
- AIR CLEANER ELEMENT – Remove & Replace
- CABIN AIR FILTER – Remove & Replace
Joann D. gave our service a 5 star review on 7/23/2025
